Step 1: Identify your AG Bender model.
Which model Bender do I have?
The Bender revision and serial numbers are located on one of the frame tubes. Turn your machine upside down and look for a tag. The Bender shown below is revision 7.2, serial number 00036.
On some older models, the numbers are engraved into the frame tube. Here is Bender model 6.4, serial number 00023:
Step 2: Select your model below:
AG Bender 7
Videos
- How to Use the AG Bender 7 – Learn all about Bender setup, operation and maintenance.
- Rail Mount Method Instruction Video – Learn how to install solar critter guard using our favorite, tried-and-true technique. A must-watch if you’re new to the Bender! More info on the Rail Mount Method.
Other Resources
- AG Bender Use & Maintenance
- AG Bender Getting Started (PDF) – How to assemble the Bender upon first receiving it.
- Spindle Support Reinforcement – How to install & adjust the black spindle support parts which we now include on every Bender.
- AG Bender Contact Rod Wear and Maintenance – Extend the life of your Bender by rotating the Contact Rods periodically.
- Spindle Adapter Assembly Instructions (PDF) – How to assemble the spindle adapters if they are shipped separately.
- Assembling conduit clamps / bend width knobs (video) – How to assemble the parts which attach the sliding portion of the AG Bender to the underlying strut channel.
- Critter Guard Installation
- Sourcing tools & materials
- Solar Animal Guard Sourcing Guide – How to pick the right tools and materials for your critter guard job, and where to buy them.
- Solar Critter Guard Job Cost Estimator – Estimate how many materials you’ll need for a given job, and how long it will take to complete.
- Types of Wire Mesh – PVC vs powder coatings
AG Bender 6
Videos
How to Use the AG Bender (R6) – Learn all about Bender setup, operation and maintenance.
Other Resources
- AG Bender Assembly Instructions (PDF) – How to assemble the Bender upon first receiving it.
- AG Bender Contact Rod Wear and Maintenance – Extend the life of your Bender by rotating the Contact Rods periodically.
- Swapping Contact Rods in AG Bender R6 (PDF) – How to retrofit different Contact Rods into your Bender when switching between PVC- and powder-coated wire mesh.
- Spindle Adapter Assembly Instructions (PDF) – How to assemble the spindle adapters if they are shipped separately.
AG Bender 5 and below
Please contact us for support with early model Benders!
Support
Please contact us for technical support and other questions!